Manual stacker PL 1000 ST, I43101
1 250,00 € + KM
Trolley 738x750x450 mm, with three shelves and wheels
250,00 € + KM
manual stacker PL 2500 ST, I43251
1 650,00 € + KM
- Manual stacker with robust construction.
- Equipped with foot pump.
- Width 755 mm and length 1655 mm.
- Lifting speed 22 mm/lift.
- Width of forks 550 mm.
- Length of forks 1150 mm.
- Lifting capacity 1000 kg.
- Lifting height 90-2500 mm.
- Max mast height 2925 mm.
- Min pole height 1838 mm.
- Conveyor radius 1380 mm.
- Guide wheels nylon, Ø 150 x 50 mm, equipped with brake.
- Fork wheels nylon, Ø 80 x 70 mm.
- The weight is 280 kg.
Related products
Semi-electric stacking PL 2500 EL, I43256
- The semi-electric stacker uses a battery-powered motor for the lifting, the moving is manual.
- The stacker is equipped with a battery and charger.
- Lifting capacity 1000 kg.
- Width of forks 580 mm.
- Length of forks 1150 mm.
- Width 800 mm and length 1840 mm.
- Lifting height max 2500 mm.
- Lifting height min 90 mm.
- Pole height 1840 mm.
- Conveyor radius 1425 mm.
- Lifting speed with load 80 mm/s.
- Lowering speed with/ without load 150/120 mm/s.
- Engine power 1,5 kW.
- Battery 12V/120Ah.
- Charger 12V/15Ah.
- Guide wheels nylon, Ø 180 x 50 mm.
- Fork wheels nylon, single Ø 80 x 78 mm.
- Weight including battery 460 kg.
tuner WS10S-3000, I45104
Capacity Kg: 1000
Min fork height mm: 90
Lifting height mm: 3000
Centre of gravity separation: 600
Min support height: 2035
Max support height: 3500
Total width mm: 820
Total lenght mm: 1770
Free lift mm: 0
Fork width mm: 160
Fork length mm: 1150
Driving speed without/with load km/h: 4/3.5
Lifting speed without/with load mm/s: 134/95
Lowering speed without/with load mm/s: 94/130
Swing radius mm: 1430
Electronics: Curtis
Drive motor: 0,65 kW
Lifting motor: 1,5 kW
Truck battery: 75Ah/12V x 2
Charger: Built-in
Fork wheel mm: Polyutethane 78 x 93
Drive wheel mm: 220 x 70
Gradient capacity without/with load: 10/3 degrees
Brake: Electromagnetic
Speed regulation: Electronic impulse
Weight kg incl. battery: 570
Mast type: Duplex
EJC110-220 Electric recloser stackers Jungheinrich
Additional information: price (al.6900.00) Jungheirich electric reclining stacker with lifting capacity up to 1200kg.
The EJC First Series Stacker is a good choice for short storage distances and heights from 2500 to 4700 mm. The EJC First Series Stacker operates well in tight conditions with a base of 1000-1200kg. If you need to move the stacker at a slow pace at high altitudes, keeping the handlebars upright will help. The second series of EJCs will provide more lift and height where needed.
Electric recloser stackers EJCM10 ZT/M13 ZT Jungheinrich
Additional information: price (al.3500.00) Jungheirich electric reclining stacker with lifting capacity up to 1000kg.
The EJC M10 ZT/M13ZT is designed for moving light undercarriages. The 0.6kw engine does the job when you need to move up to 1000-1300kg of scaffolding, up to a height of 2300-3300mm. You can choose between 4 different heights . The gel battery and integrated charger allow you to avoid filling the battery with water and maintenance.
Stacker with sliding mast ETV C16/C18 Jungheinrich
Additional information: price (al.28000.00) Jungheirich sliding mast stacker with lifting capacity up to 2000kg.
The ETV C16/C18 is a good combination and an example of a two in one lift. Slightly higher clearance and soft wheels give you the option to charge with a stacker outdoors. This is a good way to organise indoor and outdoor storage on a single machine. Lifting heights according to the choice of mast 4200mm-7400mm.
Stacker with sliding mast ETV/ETM 214/216 Jungheinrich
Additional information: price (al.24000.00) Jungheirich sliding mast stacker with lifting capacity up to 1600kg.
The working height of the ETV/ETM 214/216 sliding mast stackers is 5000mm up to 10700mm according to the selected mast. A comfortable, ergonomic workplace for the operator is the key to a modern warehouse. Can move in narrow spaces with a stacking radius of approx. 1600mm and a min. shelf clearance for operation of approx. 2700mm.(PS ! always consult working aisles).
