ASK FOR A QUOTE +372 508 1126
WS10S-3300 tuner, I45106
4 850,00 € + KM
manual stacker PL 1600 ST, I43161
1 200,00 € + KM
Semi-electric stacker PL 800-ST EN
3 250,00 € + KM
- The semi-electric stacker uses a battery-powered motor for the lifting, the moving is manual.
- The stacker is equipped with a battery and charger.
- Lifting capacity 1000 kg.
- Width of forks 570 mm.
- Length of forks 1150 mm.
- The width of the stacker is 770 mm and the length 1720 mm.
- Lifting height 800 mm.
- Pole height 1200 mm.
- Conveyor radius 1280 mm.
- Lifting speed with load 90 mm/s.
- Drop speed 100-120 mm/s.
- Engine power 1,5 kW.
- Battery 12V/85Ah.
- Charger 12V/20Ah.
- Guide wheels nylon, Ø 180 x 50 mm.
- Fork wheels nylon, Ø 74 x 70 mm.
- Weight including battery 300 kg.
Related products
Semi-electric stacking PL 2500 EL, I43256
- The semi-electric stacker uses a battery-powered motor for the lifting, the moving is manual.
- The stacker is equipped with a battery and charger.
- Lifting capacity 1000 kg.
- Width of forks 580 mm.
- Length of forks 1150 mm.
- Width 800 mm and length 1840 mm.
- Lifting height max 2500 mm.
- Lifting height min 90 mm.
- Pole height 1840 mm.
- Conveyor radius 1425 mm.
- Lifting speed with load 80 mm/s.
- Lowering speed with/ without load 150/120 mm/s.
- Engine power 1,5 kW.
- Battery 12V/120Ah.
- Charger 12V/15Ah.
- Guide wheels nylon, Ø 180 x 50 mm.
- Fork wheels nylon, single Ø 80 x 78 mm.
- Weight including battery 460 kg.
tuner WS10S-3000, I45104
Capacity Kg: 1000
Min fork height mm: 90
Lifting height mm: 3000
Centre of gravity separation: 600
Min support height: 2035
Max support height: 3500
Total width mm: 820
Total lenght mm: 1770
Free lift mm: 0
Fork width mm: 160
Fork length mm: 1150
Driving speed without/with load km/h: 4/3.5
Lifting speed without/with load mm/s: 134/95
Lowering speed without/with load mm/s: 94/130
Swing radius mm: 1430
Electronics: Curtis
Drive motor: 0,65 kW
Lifting motor: 1,5 kW
Truck battery: 75Ah/12V x 2
Charger: Built-in
Fork wheel mm: Polyutethane 78 x 93
Drive wheel mm: 220 x 70
Gradient capacity without/with load: 10/3 degrees
Brake: Electromagnetic
Speed regulation: Electronic impulse
Weight kg incl. battery: 570
Mast type: Duplex
WS10S-3300 tuner, I45106
Capacity Kg: 1000
Min fork height mm: 90
Lifting height mm: 3300
Centre of gravity separation: 600
Min support height: 2185
Max support height: 3800
Total width mm: 820
Total lenght mm: 1770
Free lift mm: 0
Fork width mm: 160
Fork length mm: 1150
Driving speed without/with load km/h: 4/3.5
Lifting speed without/with load mm/s: 134/95
Lowering speed without/with load mm/s: 94/130
Swing radius mm: 1430
Electronics: Curtis
Drive motor: 0,65 kW
Lifting motor: 1,5 kW
Truck battery: 75Ah/12V x 2
Charger: Built-in
Fork wheel mm: Polyutethane 78 x 93
Drive wheel mm: 220 x 70
Gradient capacity without/with load: 10/3 degrees
Brake: Electromagnetic
Speed regulation: Electronic impulse
Weight kg incl. battery: 570
Mast type: Duplex
EJC110-220 Electric recloser stackers Jungheinrich
Additional information: price (al.6900.00) Jungheirich electric reclining stacker with lifting capacity up to 1200kg.
The EJC First Series Stacker is a good choice for short storage distances and heights from 2500 to 4700 mm. The EJC First Series Stacker operates well in tight conditions with a base of 1000-1200kg. If you need to move the stacker at a slow pace at high altitudes, keeping the handlebars upright will help. The second series of EJCs will provide more lift and height where needed.
Electric recloser stackers EJCM10 ZT/M13 ZT Jungheinrich
Additional information: price (al.3500.00) Jungheirich electric reclining stacker with lifting capacity up to 1000kg.
The EJC M10 ZT/M13ZT is designed for moving light undercarriages. The 0.6kw engine does the job when you need to move up to 1000-1300kg of scaffolding, up to a height of 2300-3300mm. You can choose between 4 different heights . The gel battery and integrated charger allow you to avoid filling the battery with water and maintenance.
Stacker truck ECE 220/225 Jungheinrich
Additional information: price (al.9600.00) Jungheirich low loader with lifting capacity up to 2500kg.
The ECE 220/225 is a very handy low-loader. This well-designed forklift provides the operator with a comfortable ride, with quick on and off. The low platform and back support ensure efficient work when stacking. It is also possible to choose a model with long forks, which adds a base and provides extra capacity if needed. There is also the optional easyPilot function, which can be used in conjunction with the remote control to automatically move the lift forward.
Stacker with sliding mast ETV C16/C18 Jungheinrich
Additional information: price (al.28000.00) Jungheirich sliding mast stacker with lifting capacity up to 2000kg.
The ETV C16/C18 is a good combination and an example of a two in one lift. Slightly higher clearance and soft wheels give you the option to charge with a stacker outdoors. This is a good way to organise indoor and outdoor storage on a single machine. Lifting heights according to the choice of mast 4200mm-7400mm.
Stacker with sliding mast ETV/ETM 214/216 Jungheinrich
Additional information: price (al.24000.00) Jungheirich sliding mast stacker with lifting capacity up to 1600kg.
The working height of the ETV/ETM 214/216 sliding mast stackers is 5000mm up to 10700mm according to the selected mast. A comfortable, ergonomic workplace for the operator is the key to a modern warehouse. Can move in narrow spaces with a stacking radius of approx. 1600mm and a min. shelf clearance for operation of approx. 2700mm.(PS ! always consult working aisles).
