ASK FOR A QUOTE +372 508 1126
kapp 1800x900x400 mm, I71601
250,00 € + KM
Set of 50 hooks for perforated wall, I74115
83,00 € + KM
Set of 30 hooks for perforated wall, 74113
60,00 € + KM
- The kit includes:
- Perfopi 38 mm, 5 pieces.
- Perfopiik 200 mm, 3 pieces.
- Perfp double spike 38×11 mm, 6 pieces.
- Perfo double pin 64×11 mm, 2 pieces.
- Tool holder 23/44 mm, 3 pieces.
- Perfo double spike 50 mm, 3 pieces.
- Perfo cup holder with topper 2 pieces.
- Perfo holding tube 9 mm, 2 pieces.
- Perfo holding tube 16 mm, 2 pieces.
- Perfo holding tube 24 mm, 2 pieces.
- The perforated pegs are fixed to the perforated wall.
Related products
STANDARD, 2000×600 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 600 mm
- The exact width of the main body is 1044 mm
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
STANDARD, 2000×600 mm, 600 kg compartment, 100 kg tile, extension piece
- Set includes 2 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The frigram consists of two posts, two pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of extension 2000 mm, depth 600 mm
- The exact width of the extension is 1000 mm.
- The extension piece is not a separate shelf. To form a multipart shelving unit, one or more additional parts must be attached in series to the main part.
- Supplied in parts
STANDARD, 2000x700x500 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 500 mm
- The exact width of the main body is 700 mm.
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
