Shelving board 1000×600 STANDARD, 100 kg, RAL7038, light grey
15,00 € + KM
- Shelves made of powder-coated sheet metal
- Dimensions – 1000×600 mm
- RAL 7838, light grey
- Carrying capacity of the shelf for a uniformly distributed load 100 kg
- Min purchase quantity 6 pcs, pack
Related products
STANDARD, 2000×400 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 400 mm
- The exact width of the main body is 1044 mm
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
STANDARD, 2000×400 mm, 600 kg section, 100 kg tile, extension piece
- Set includes 2 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The frigram consists of two posts, two pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of extension 2000 mm, depth 400 mm
- The exact width of the extension is 1000 mm.
- The extension piece is not a separate shelf. To form a multipart shelving unit, one or more additional parts must be attached in series to the main part.
- Supplied in parts
STANDARD, 2000×500 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 500 mm
- The exact width of the main body is 1044 mm
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
STANDARD, 2000×600 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 600 mm
- The exact width of the main body is 1044 mm
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
STANDARD, 2000x700x500 mm, 600 kg compartment, 100 kg tile, bottom part
- Set includes 4 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The cold frame consists of four posts, four pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Height of base 2000 mm, depth 500 mm
- The exact width of the main body is 700 mm.
- The main part is a freestanding shelf. The main section can be extended by attaching additional sections with the same depth dimension to the shelf.
- Supplied in parts
STANDARD, 2550×600 mm, 600 kg compartment, 100 kg tile, extension piece
- Set includes 2 poles, 6 shelves, 1 fastening device.
- Shelves and uprights are made of powder-coated sheet metal.
- The frigram consists of two posts, two pole supports and fastenings.
- The load capacity of each shelf for a uniformly distributed load is 100 kg.
- Adjustment range of the shelf surface is 50 mm
- Extension height 2550 mm, depth 600 mm
- The exact width of the extension is 1000 mm.
- The extension piece is not a separate shelf. To form a multipart shelving unit, one or more additional parts must be attached in series to the main part.
- Supplied in parts
